CIRCO S85L

Friction Summary: 0.24-0.30µ

Temperature Range: 0-500°C

Low-metallic carbon

Rear Race Pad for FWD

Low friction

Rear pads for TCR

CIRCO S85L has been designed specifically for TCR rear applications where rear brake control is critical. The friction levels in this pad are low enough to allow the brakes to work with less likelihood of locking the rear wheels.  S85L has good temperature capability therefore is suitable for any application where the friction levels required is low, but consistent performance is required.

Typical applications: Rear pads for TCR or similar

What you get:
1 part number = 1 set of pads. In most cases this is 4 pads per box. If your calipers take more than 2 pads per caliper (E.g Audi RS4), the part number you buy will include all the pads you need to service the axle set of calipers. Also included is bedding instructions to help you get the most out of your new pads. 

 

Brake pad product notes:

Shims and Wear sensors

Our brake pad products are designed for high performance and competition use. Therefore, we do not always provide ancillary parts such as wear sensors or anti-squeal shims on some of the WinmaX and CIRCO range. Ancillary parts are provided in some cases depending on the pad specification and fitment. Anti-Squeal shims are available for some shapes as separate items on this website.

If you are unsure about any of this, please contact the us for confirmation.

Fitment

        

FRONT, REAR or UNIVERSAL?

Our brake pad products are engineered to replace OEM parts with higher performance friction. Many pad shapes are designed to be installed in only front or rear. However, there are many pad shapes in the automotive world that are shared across multiple vehicle and caliper makes and models. In many cases these shapes are installed in the front on one vehicle, but the same shape is used in the rear of another. In other cases, the same pad shape is used in both front AND rear. If a brake pad is known to be used for front and/or rear, we refer to it as UNIVERSAL.

If unsure about the fitment when purchasing, please check with us.

 

 

 

 

 

  • Dunlop 07.1715.5 15 mm
  • StopTech ST21 15 mm
  • Porsche 914 / 6 ( 70 - 72 )
  • Porsche 914 / 4 ( 70 - 72 )
  • Porsche 912 ( 65 - 70 )
  • Porsche 910 2.0 M-Calipers (65-69)
  • Porsche 904 Carrera GTS, 904/6 (63-65)
  • Lamborghini Countach LP400 / LP500
  • Brembo Type 62 (07.1715...) 15 mm
  • Maserati BiTurbo 2.5 (83-86)
  • Porsche 911 / 911 S ( 72 - 83 )
  • Porsche 911 / 911 2.7 / 3.0 / 3.2 Carrera ( 72 - 89 )
  • Porsche 911 / 911 2.0 -2.8 S-Calipers ( 64 - 73 )
  • Porsche 911 / 911 3.0 SC
SKU MB1536-15-S85L
Brand CIRCO Brakes
Shipping Weight 0.8000kg
Shipping Width 0.180m
Shipping Height 0.070m
Shipping Length 0.220m
Shipping Cubic 0.002772000m3
Unit Of Measure ea

More From This Category