Are you regularly out on the track and pushing your F22 LCI Facelift to the limit? Then we also have the right thing for you to cool your brake system!


Air duct inlet

Our track kit is designed for the F22 LCI (FL version with M package bumper). Designed for regular track use, this brake cooling kit offers maximum cooling performance. We supply flow-optimized funnels that replace the original intake funnels in the front bumper and the brake air duct, and have a classic ventilation hose connection (51mm).


Air duct outlet

We channel the air flow towards the center of the brake disc to use the turbine effect to cool the disc from the inside out. In doing so, we direct the airflow at the disc at an angle that does not lead to any scattering losses so that the air volume can be used as efficiently as possible. The lightweight construction in combination with powder-coated aluminum makes the component sufficiently strong and at the same time light and robust.

IMPORTANT: The different models vary slightly in wheel position, coupled with different suspension geometries, as well as wheel and tire combinations, it will be impossible for us to cover all variants. In the worst case scenario, the wheel could rest slightly on the ground at full steering lock (which should only be the case when parking), which cannot lead to damage to the tire.

Scope of delivery

1x air duct inlet for the front axle 1x left
1x air duct inlet for the front axle 1x right
1x anchor plate for the front axle 1x left
1x anchor plate for the front axle 1x right
2x air hose = 2 meters
4x hose clamp


This article is suitable for

F22 facelift models with M package bumper (M240i)

 

  • BMW 2 Series (F22) M235i
  • BMW 2 Series (F22) M240i M Performance
SKU SE-14069
Brand Speed Engineering

More From This Category