With this kit, we have found a way to cool the brakes of the Fiesta ST MK8 with maximum efficiency and use a wear-free installation of the hose.


This article will only be produced after receipt of order! This may result in a delivery time of 4-6 weeks.

Admission:

The wheel position has no influence on the movement of the hose. In order to cool a brake effectively, it is necessary to get as much air as possible to it. The most efficient way of tapping the maximum volume flow for this is and remains at the front of the vehicle. We also use this in the Fiesta ST by replacing the fog lights with our air intakes. Our inlets are plug & play and are fitted in place of the fog lights. The inlets have the right curvature for collision-free hose installation


Outlet:

Here too, the brake disk must be supplied with air as centrally as possible. The brake disk of the Fiesta ST does not have a large pot. A conventional solution using an armature plate would therefore result in the inner surface of the friction disk being cooled on one side. However, in order to make use of the turbine effect of the brake disc, we have developed a brake cooling system which is mounted on the wishbone and flows onto the center of the disc regardless of the wheel position. It is simply attached using existing locking pins and without any permanent changes to the vehicle.


This article is suitable for

  •  Ford Fiesta ST MK8
  • Ford Fiesta ST Mk8 2019-
SKU SE-13528
Brand Speed Engineering

More From This Category