With this kit, we have found a way to cool the brakes of the Fiat Abarth as efficiently as possible using a wear-free hose assembly.

The wheel position has no influence on the movement of the hose. The most efficient way to tap the maximum volume flow for this is and remains at the front of the vehicle. We also use this for the Abarth by developing Plug&Play funnels for the side openings of the bumper. The inlets have the right curvature for collision-free hose installation. 

Outlet: Here too, the brake disk must be supplied with air as centrally as possible. The brake disk of the Abarth does not have a large pot. A classic solution using an armature plate would therefore result in the inner surface of the friction disk being cooled on one side. However, in order to make use of the turbine effect of the brake disc, we have developed a brake cooling system which is mounted on the wishbone and flows onto the center of the disc regardless of the wheel position. It is simply attached using existing locking pins and without any permanent changes to the vehicle.

Included in the scope of delivery:

• 1x air duct outlet left
• 1x air duct outlet right
• 1x air duct inlet left
• 1x air duct inlet right
• 1x hose (1 meter)
• 4x mounting clamps

Article is suitable for

• Fiat Abarth