This article will only be produced after receipt of order! This may result in a delivery time of 4-6 weeks.

With this kit, we have found a way to cool the brakes of the Suzuki Swift as efficiently as possible using a wear-free assembly of the hose.

Admission:

The wheel position has no influence on the movement of the hose. In order to cool a brake effectively, it is necessary to get as much air as possible to it. The most efficient way of tapping the maximum volume flow for this is and remains at the front of the vehicle. We also use this in the Swift by replacing the fog lights with our air intakes. Our inlets are plug & play and are fitted in place of the fog lights. The inlets have the right curvature for collision-free hose installation

Outlet:

Here too, the brake disk must be supplied with air as centrally as possible. The brake disk of the Swift does not have a large pot. A classic solution using an armature plate would therefore result in the inner surface of the friction disk being cooled on one side. However, to make use of the turbine effect of the brake disc, we have developed a brake cooling system which is mounted on the wishbone and flows to the center of the disc regardless of the wheel position. It is simply attached using existing locking pins and without any permanent changes to the vehicle.


Included in the scope of delivery:

  • 1x air duct outlet left
  • 1x air duct outlet right
  • 2x air inlet duct 
  • 2x hose (2 meters)
  • 4x mounting clamps
  • 4x cable ties

This article is suitable for

  • Suzuki Swift RZ/AZ
  • Suzuki Swift AZ (2017-)
SKU SE-13570
Brand Speed Engineering

More From This Category