This article will only be produced after receipt of order! This may result in a delivery time of 4-6 weeks.

Tailor-made and suitable for your BMW F90 M5

Most vehicles have only a hint of cooling on the front axle and usually no cooling at all on the rear axle. Porsche has recognized, among other things, that brake cooling is essential for the performance, durability and service life of the brakes and their components.

The geometry of the components is designed to fit the wishbone of the F90 and can be installed plug/play with cable ties and without the need for a lift or removing the wheels. The inlets are designed to be flat so that they do not represent the lowest point of the vehicle and deflect the airflow under the vehicle and direct it to the center of the rotating wheel.

The components are made of PA12 plastic and already contain slots for fastening. The continuous taper between the inlet and outlet accelerates the air flow while maintaining the same volume, resulting in a targeted air discharge.

What about the rear axle?

It is not possible to cover every vehicle and every axle with a tailor-made solution, which is why we have developed a universal cooling system and tested it intensively for months on a wide variety of vehicles. You can find the product here: Cooling for the rear axle

The following diagram shows the measurement on the rear axle with the anchor plate still fitted:

A difference of sometimes 50°C in the peak over the measuring band can be seen here. However, if you drill holes in the armature plate or remove it, you have the maximum performance with a delta of up to 200°C. You can view the report on this under the following link: Documentation

 Included in the scope of delivery:

• 1x brake cooling L
• 1x brake cooling R
• 4x cable ties

This article is suitable for

• BMW M5 F90