For many vehicles, including the long-running E36, brake cooling is recommended even under moderate loads, even off the racetrack. This not only improves braking performance but also drastically reduces wear on the friction partners. Our anchor plate channels the air flow to the center of the brake disc in order to use the turbine effect to cool the disc from the inside. We specifically direct the air flow to the disc at a defined angle to avoid any scattering losses and to use the available air volume as efficiently as possible. The lightweight construction in combination with powder-coated aluminum makes the anchor plate sufficiently strong and at the same time light and robust. During and after braking, the ball joint is subjected to enormous heat loads as it is extremely close to the hot brake disc. Wear increases disproportionately. This anchor plate therefore has additional shielding of the bearing to increase its longevity.

Included in delivery:

• 1x anchor plate for the front axle left
• 1x anchor plate for the front axle right

(Air hose and hose clamps are not included – can be purchased separately)

The anchor plate is a plug-and-play fit, and no additional mounting hardware is required. The original mounting points and screws can be reused.

Item is suitable for:

• BMW E36 and M3