WINMAX W6.5

Compound: Semi-metallic
Friction: 0.47 – 0.50µ
Temp range: 50 – 800degC

Competition brake pads for rally, sprint and hillclimb

Motorsport pads, Tarmac and Gravel.

The WinmaX W6.5 compound was developed by taking the very best charateristics from the original W7 compound to create a pad that is long lasting, has mid-high friction and works from very low right through to extreme temperatures around 800?. This compound is extremely consistent throughout the temperature range offering the driver repeatable brake pedal performance and confidence. W6.5 is a common choice amongst prefessional race and rally teams.

This pad is ideal for:
Tarmac Rallying
Gravel Rallying
Sprint racing for small to medium cars 

Why buy this product?
Designed for use in application where low temperature friction is required
Very high levels of modulation 
Excellent all-round brake pad suitable for rallying
Provides long lasting pad life and rotor wear.

What you get:
1 part number = 1 set of pads. In most cases this is 4 pads per box. If your calipers take more than 2 pads per caliper (E.g Audi RS4), the part number you buy will include all the pads you need to service the axle set of calipers. Also included is bedding instructions to help you get the most out of your new pads

 

Brake pad product notes:

Shims and Wear sensors

Our brake pad products are designed for high performance and competition use. Therefore, we do not always provide ancillary parts such as wear sensors or anti-squeal shims on some of the WinmaX and CIRCO range. Ancillary parts are provided in some cases depending on the pad specification and fitment. Anti-Squeal shims are available for some shapes as separate items on this website.

If you are unsure about any of this, please contact the us for confirmation.

Fitment

        

FRONT, REAR or UNIVERSAL?

Our brake pad products are engineered to replace OEM parts with higher performance friction. Many pad shapes are designed to be installed in only front or rear. However, there are many pad shapes in the automotive world that are shared across multiple vehicle and caliper makes and models. In many cases these shapes are installed in the front on one vehicle, but the same shape is used in the rear of another. In other cases, the same pad shape is used in both front AND rear. If a brake pad is known to be used for front and/or rear, we refer to it as UNIVERSAL.

If unsure about the fitment when purchasing, please check with us.

  • Alcon TA6, CAR89, CAR11 (4489) D51 17 mm
  • Alcon TA6, CAR89, CAR11 (4489) D51 18 mm
  • Alcon TA6, CAR89, CAR11 (4489) D51 25 mm
  • AP Racing CP3558 D51 25 mm
  • AP Racing CP3558 D51 (no tab) 28.5 mm
  • AP Racing CP3894 D51 18 mm
  • Baer Brakes 6S 18 mm
  • Coleman Series IV 18 mm
  • StopTech ST60 18 mm
  • AP Racing CP3894 D51 16mm
  • AP Racing CP5070 D51 16mm
SKU WMP829-16-W6.5
Brand WinmaX
Shipping Weight 3.0000kg
Shipping Width 0.180m
Shipping Height 0.070m
Shipping Length 0.220m
Shipping Cubic 0.002772000m3
Unit Of Measure ea

Related products

More From This Category